Repair LG OLED power supply
Fixed-price serviceHow the repair works.
Book the service
Pick your board and request the repair. You'll get the shipping address and an order number by email.
Send in the board
Remove the power board and pack it safely (bubble wrap, sturdy box). Include the order number and ship it to us; outbound shipping is at your cost.
Repair & test
Electrolytic capacitors, MOSFETs and fuses are checked and replaced where needed, usually the same or next working day.
Return shipping
Return shipping within Germany is free, with an invoice (19% VAT itemised) and a 12-month warranty on the repair.
Which boards do we repair?
LG OLED power boards only
Exclusively power boards from LG OLED TVs (EAY series, e.g. EAY65689423, EAY65170411 and equivalents). We don't accept mainboards, T-Con boards or other manufacturers — that specialisation is why our success rate is so high.
Typical symptoms
- No standby LED
- TV won't start
- Device shuts off after seconds
- Relay clicks with no picture
- Failure after a storm or power surge
How do I remove my board correctly?
Disconnect power
Switch the TV off, unplug it and wait at least 2 hours — the capacitors hold their charge for a long time.
Remove the back panel
Lay the TV face down on a soft surface and undo the screws of the back panel.
Find the power board
Usually the board the mains cable connects to. To be safe, check the number, here's how to read it.
Release connectors & screws
Take a photo first. Carefully release all connectors, undo the screws and take the board out.
No soldering needed — everything is plugged and screwed. Don't handle the board while the TV is connected to mains. Unsure about the removal? Better to call in a local technician, or write to us.
Frequently asked questions about the service.
Guides for the symptom.
Short explainers — and how to continue with a part or a repair.