In short
If LG OLED eARC has no sound, it is usually cable (eARC-capable), wrong HDMI port, bar mode, CEC, or software — not the PSU (Power Supply Unit / power board).
Try pass-through/optical, test TV speakers, update TV+bar firmware.
Practical checks
Audio path:
- eARC-capable HDMI cable
- Only the eARC-marked port
- CEC on
- Bar set to eARC/ARC
- TV firmware current
Vs PSU
Only with dead set / blink / standby failure might PSU overlap — stays black / repair. Related: HDMI no signal.
AmparioWeb
We help with boards — pure audio: checklist and support. Dead set: repair.
Frequently asked questions
- Optical works, eARC not?
- Often cable/port/handshake — not PSU.
- Related to HDMI no signal?
- Yes — HDMI no signal.
- AmparioWeb?
- For board issues yes. Pure audio: support.
Support our work.
We write these articles for free, for everyone. A small donation helps keep the format going.
Power boards for LG OLED — tested under load, 12-month warranty.
Go to shopRelated articles
LG OLED stays black
LG OLED stays black with no picture? Check standby, triage PSU vs panel vs mainboard — AmparioWeb helps with diagnosis, repair and parts.
LG OLED TV won't turn on
LG OLED won't power on? Aging 820 nF film capacitors in the PSU often cause it. Spot capacity loss — AmparioWeb repairs or supplies a tested replacement PSU.
LG OLED clicks twice and turns off
LG OLED clicks twice then shuts off, or clicks with no picture? Relay engages, protection aborts start — often PSU, short or panel load. AmparioWeb helps with diagnosis and repair.